InsOpaint Kitchen and Bathroom paint has been specifically formulated to provide premium protection against mould and bacteria growth typically found in kitchen and bathrooms areas. Combined with our world-leading insulating technology, this hard-wearing bathroom paint emulsion also reduces heat loss through walls and ceilings. Painting and decorating has never been easier with this all-rounder Eco-friendly, washable kitchen paint that dries to a subtle mid-sheen finish that resists moisture, stains and grease.
InsOpaint acrylic paint covers up to 7 m² per litre with the recommended minimum of two coats. Painters and decorators can easily apply this thermal insulation bathroom paint by brush, roller or spray. If you are spray painting, filters MUST be removed and nozzle size increased to between 0.019X to 0.026X. InsOpaint thermal insulating kitchen paint has a distinct energy-saving advantage and has been scientifically proven to work. Painters and decorators should know we recommend a minimum of two coats of our acrylic paint for interior walls to achieve maximum thermal insulation and three coats for exterior walls. You can wallpaper over our kitchen and bathroom paint and it will continue to provide you with thermal insulation to reduce the heat lost through the walls and ceilings by reflecting the heat BACK into the room/building. A 5L tub of this mould resistant paint will cover up to 17.5 m² with 2 coats.
InsOpaint Kitchen and Bathroom paint thermal insulation qualities are not diminished when painted on top of lining paper, wallpaper already painted with another emulsion and non-blown vinyl wallpapers. This eco-friendly thermal insulation paint should not be applied to “blown vinyl” wallpapers which absorb the paint and leave the insulating micro technology as a residue which will later become dispersed. Painting new plaster with our insulating emulsion paint requires a mist coat application, a coating that is one part paint and one part water, only then should you apply the rest of the insulating paint.
||Preparation: Remove loose or flaking material. Make sure the surface is. clean (no dirt or grease) and dry. Seal: If new, bare and absorbent surface, seal with this product, thinned 10% with water.
Paint: Before application, stir paint well to mix paint completely.
Dry: Apply 2 coats with a brush or roller, leave 2-4 hours between coats. Do not apply in very damp or humid conditions or extreme temperatures. TIP: if the colour change is strong, more coats may be required.
Clean: Remove paint from the brush or roller with a cloth and then wash with water
Store: Store the paint in dry conditions and protect from any extreme temperatures.